Why The Saab 9-3 Key Replacement Is Beneficial In COVID-19?
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of specific steps to add a second ignition key. It requires dealer service with the handheld computer known as Tech-2. Then a new car key and transponder must be purchased and then programmed to the car.
It is recommended to rotate your keys in order that one does not get worn out more quickly than the other. This will help keep your keys in perfect condition.
Replacement Case
Unlike the classic Saab keys of old keys, the latest key fobs are equipped with electronics which makes it more difficult to make a copy. This has made stealing cars a lot more complicated than it was 20 years ago. However, it also has made the replacement of lost keys a much more expensive task.
Every owner of a Saab 9-3 should have at minimum two working keys. If one of them is lost, it costs a fortune to purchase a new one for the car because it involves replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.
There are some ways around these high cost. saab key www.thekeylab.co.uk will look up the code from an old key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade for a fraction of the dealer's cost. The key must, however, be identical to the original one in order to function within your car.
You can also change the case yourself by following these steps. You'll require a flathead and patience. With the screwdriver, slowly break the plastic and then separate the emergency key from the case. When the case is opened take out all electronic components and place them in your new case. Make sure to insert the correct badge and key back in the case too.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be easily and quickly replaced. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the remote key fob battery in only four steps. This tutorial is suitable for any modern-day saab key fob though the process may vary slightly.
The first step is to find the button that lets off the backup key in the fob. It's usually close to the Saab logo on the back of the fob. Next, use a flathead screwdriver into the small hole of this button. This should be sufficient to open the case to allow you to change the battery.
Once the new CR1632 battery is in place, you can reassemble the remote key fob, and then program it to your car. The entire process should take no more than a half hour at the most. It's a simple process that doesn't require any special tools.
The process is more complicated in the event that you lose the key, but it's possible. The dealer will first need to read the VIN of the vehicle and order an additional TWICE module and key blade with the proper unique code. The dealer will then have to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob contains a battery that is used to lock and unlock your vehicle. The batteries last for a certain time, and they will eventually go out of service. It's a common issue for all vehicles. The good news is you can change the batteries in most key fobs without having to replace the entire case. Amazon sells replacement fobs that already have all the electronics in place. You can simply pop the case open and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, place an small screwdriver with a flat head into the slot that is in the middle. Work the screwdriver around the case until it will split open, making it simple to remove.
When you are ready to replace your keys, ensure that you have spare keys, since this will cut down your total cost by a significant amount. If you have an extra key, you can request the dealer to cut it and program it to your car. This is much less expensive than buying a new key fob.

If you don't have a spare you can add a second key to your car, however this requires a lot research and effort. Adding a second key costs a few hundred dollars, and also requires programming of the car's computer. This can be accomplished by a professional, but it's a costly choice for the majority of owners.
Replacement Ignition
Unlike earlier Saab cars, the modern SAAB 9-3 models feature an upgraded alarm system that is based on a coded key. This means that if you lose your only working key, acquiring another one could be very expensive as the car has to have a specific computer module installed and it must also be specifically designed to accept a different key. Most locksmiths cannot do this and dealers will charge hundreds of dollars just to program the new key!
Dealers will charge you the highest price to replace your car computer (also known as the CIM or SAAB twice) If you lose your only functioning key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it to accept a second key, which will save you more than 50% of the amount you pay at a dealership.
If you've owned a SAAB 9-3 for an extended period of time you're aware that the ignition keys aren't very durable. If your ignition key isn't working correctly, you should think about replacing it. They can become very sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as difficult as it sounds and can be done fairly quickly with the appropriate tools.